Hi all, Do you have information regarding to this strange behavior : Topology : One AE with 2 interfaces between Juniper T640 8.4R4 and Cisco 7606. LACP configured (Active/Active) and minimum link set to 2 only on the juniper (one on the Cisco) When one of the link is shutdown on the Cisco, the AE on the T640's coming down ! great. But the Giga Interface remaining UP still sends LACP packets ! So the AE on the Cisco remaining up. Regards, David
********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ******************************** _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp