Hello, You can change preference of rsvp signaled lsps globally or per LSP :
set protocols mpls preference 10 or only for particular lsp: set protocols mpls label-switched-path xxx preference 10 Krasi > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:juniper-nsp- > [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Thursday, June 26, 2008 4:35 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] Next Gen MVPN and signalling protocol > > Hi group, > > This is my "problem": > > We have an MPLS backbone using LDP. We are configuring Next Gen MVPN. > For that we have to configure RSVP on all the core router. The problem > is that we would like to keep LDP for the data and RSVP for the > multicast, but like RSVP has a preference of 7 and LDP has a preference > of 9, all the traffic use now the LSPs created with RSVP. > The easiest way will be to increase RSVP preference to 10, but I can't > do it. > > I am studying some advanced options like "install-nexthop lsp lsp-name", > "traffic-engineering bgp-igp", "traffic-engineering mpls-forwarding", > but it seems not to be the good way. May be an other idea will be to use > an other routing-table just for multicast for each L3-VPN. > > Do you have some advices? > > Thanks ! > Samuel > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp