Hi! I'm trying to un-concatenate an STM16 - STM16 interfaces into 4xSTM4 links on a dark fiber link, however I simply can't get the links to come up in either SDH or SONET modes.
[EMAIL PROTECTED]> show interfaces so-1/1/0:0 Physical interface: so-1/1/0:0, Enabled, Physical link is Down Interface index: 150, SNMP ifIndex: 78 Link-level type: PPP, MTU: 4474, Clocking: Internal, SONET mode, Speed: OC12, Loopback: None, FCS: 32, Payload scrambler: Enabled Device flags : Present Running Down Interface flags: Hardware-Down Point-To-Point SNMP-Traps Internal: 0x4000 Link flags : Keepalives CoS queues : 8 supported, 8 maximum usable queues Last flapped : 2008-06-27 02:33:27 UTC (00:25:53 ago) Input rate : 0 bps (0 pps) Output rate : 0 bps (0 pps) SONET alarms : RDI-L SONET defects : RDI-L, RDI-P [EMAIL PROTECTED]> show interfaces so-2/0/0:0 Physical interface: so-2/0/0:0, Enabled, Physical link is Down Interface index: 154, SNMP ifIndex: 74 Link-level type: PPP, MTU: 4474, Clocking: Internal, SONET mode, Speed: OC12, Loopback: None, FCS: 32, Payload scrambler: Enabled Device flags : Present Running Down Interface flags: Hardware-Down Point-To-Point SNMP-Traps Internal: 0x4000 Link flags : Keepalives CoS queues : 8 supported, 8 maximum usable queues Last flapped : 2008-06-27 02:33:27 UTC (00:26:16 ago) Input rate : 0 bps (0 pps) Output rate : 0 bps (0 pps) SONET alarms : LOS SONET defects : LOF, LOS, SEF, AIS-L, AIS-P I've tried: - Changing the framing mode to SDH on both ends - Clocking (should be internal on both ends, but tried anyway) - FCS to 16 If I concatenate the link, it comes up immediately (even double checked with the path trace). What I find strange is that this is something we do in a production environment with STM-4's, however this has transmission gear in between. Any thoughts? Thanks, Andrew _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp