With the M7i, if you do not have an ASP installed (separate purchase line item, irrelevant of Gig-E, although may be bundles) you will show a Tunnel Services in its place.
AFAIK, all M7i's will have one or the other. I have never seen one without the Tunnel Services module or ASM. Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erdem Sener Sent: Tuesday, July 15, 2008 7:21 AM To: Dermot Williams Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Tunnel Services Hello, IIRC, there are two bundles of M7i: either on-board Gigethernet OR ASM (services module). So, it doesn't necessarily mean that all M7i's would have built-in tunnel functionality. The best way would be to do a 'show chassis hardware' on the M7i and look for something like: PIC 2 REV 07 750-009487 CJ6728 ASP - Integrated (Layer-2-3) Cheers, Erdem On Tue, Jul 15, 2008 at 12:05 PM, Dermot Williams <[EMAIL PROTECTED]> wrote: > Yeah, it looks like the TS is on the built-in FPC and not on the RE. > My bad. > > Anyway, the main thrust of my question is answered - we can use our > M7i routers to terminate/initiate GRE/IP-in-IP tunnels. > > Thanks all > > Dermot > > -----Original Message----- > From: Scott Morris [mailto:[EMAIL PROTECTED] > Sent: 15 July 2008 12:03 > To: 'Eric Van Tol'; Dermot Williams; juniper-nsp@puck.nether.net > Subject: RE: [j-nsp] Tunnel Services > > Well... Ok. So "The tunnel pic (or built in one) serves that > function as well." should be followed up with: > > Perform a "show chassis hardware" and make sure you have one! :) M5, > M10, M20, etc. don't automatically have one either! > > Scott > > -----Original Message----- > From: Eric Van Tol [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 15, 2008 6:57 AM > To: '[EMAIL PROTECTED]'; 'Dermot Williams'; juniper-nsp@puck.nether.net > Subject: RE: [j-nsp] Tunnel Services > >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:juniper-nsp- >> [EMAIL PROTECTED] On Behalf Of Scott Morris >> Sent: Tuesday, July 15, 2008 6:52 AM >> To: 'Dermot Williams'; juniper-nsp@puck.nether.net >> Subject: Re: [j-nsp] Tunnel Services >> >> An AS-PIC (or ASM) will terminate tunnels as well, but you don't need >> to have it. The tunnel pic (or built in one) serves that function as >> well. > > Actually, you do need it on an M10i, as the M7i is the only M-Series > platform with a built-in tunnel PIC. > > -evt > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
