With no dynamic routing involved. The election of path should be based on static entries for the concerned routes.
Thanks & Regards, Tarique A. Nalkhande Juniper Technical Assistance Center 888.314. JTAC (888.314.5822) Toll Free 408.745.9500 Domestic & International Email : - [EMAIL PROTECTED] Please CC: [EMAIL PROTECTED], with the case number in the subject line. Working hours: Tuesday to Saturday ( 05:00 hrs to 13:00 hrs GMT ) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sunnyday Sent: Thursday, July 24, 2008 2:40 PM To: 'Juniper-Nsp' Subject: [j-nsp] Routing question Hello im going to ask a stupid question guys. I have 2 paths to a route one is fast Ethernet and one is serial and no routing protocol is present Which interface will be selected? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp