Can someone explain what is the difference between L2 Circuits and L2 VPNs besides the obvious (which is signaling LDP vs BGP).
Junos 9.1 doc states this in the VPN conf guide, page 509. "A Layer 2 circuit is similar to a circuit cross-connect (CCC), except that multiple Layer 2 circuits can be transported over a single label-switched path (LSP) tunnel between two provider edge (PE) routers. In contrast, each CCC requires a dedicated LSP." What does it mean the each CCC requires a dedicated LSP? If I build a transport tunnel using LDP, then all L2 VPN instances between two PEs will use the same tunnel, no matter whether ai use CCC or not. Thanks, Marlon _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
