> doing some mindgames with deploying > additional BGP routers that need to > sport the following features: > - - full BGP table > - - 6 SFP GE wirespeed slots (no over- > ~ subscription) > > That's the basic idea. Is a fully re- > dundant setup of a M10i using > - - RE-850-1536-R > able to do this or is it like walking > on the edge when it comes to the BGP- > capacity?
You should be just fine with RE-850-1536-R. The M10i has 6.4 Gbps full duplex forwarding capacity, so six GigE ports should be okay. > Also, will > (2) PE-4GE-TYPE1-SFP-IQ2 > feature full duplex wirespeed ports or > are they oversubscribed? Considering > the specsheet, the M10i is able to > deliver 12.8 Gbps - are there any back- > plane considerations or is this a shared > bandwidth between all eight slots? PE-4GE-TYPE1-SFP-IQ2 is overbooked. It has *one* full duplex GigE link to the backplane. For six wirespeed ports you will need PE-1GE-SFP, distributed over the two CFEBs. > Is using > (6) PE-1GE-SFP > an alternative that actually provides > every port with wirespeed? Yes. Note that list price for 6 x PE-1GE-SFP is higher than *one* 20 port DPCE-R-Q-20GE-SFP GigE card for the MX series. I would strongly urge you to consider the MX series here. Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp