Hallo David,
Yes windows box, not yet from unix box.
Anyway Cisco using the similar UDP for traceroute, isn't it.. ?
David Ball wrote:
Are you performing the trace from a Windows box? It will use ICMP
by default for a traceroute instead of UDP. If on a UNIX box, you
should be able to use -I or similar to tell it to use ICMP as well.
That might be one option to look at.
David
On 15/08/2008, a. rahman isnaini rst / netsoft <[EMAIL PROTECTED]> wrote:
Hi,
Why there's always lost while tracing the route to destination at
Juniper Hop (6).
But not happening on Cisco Hops (5/7)
Ping result no loss at all.
5 8 ms 1 ms 1 ms 202.1.31.130
6 * 33 ms * 121.100.4.1
7 14 ms 20 ms 13 ms 121.100.5.1
Any suggestion would be greatly appreciated..
I've done defined filter which allocated a certain of enough capacity
for protocol icmp.
rgs
a. rahman isnaini r.sutan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
