Is there any way to adjust MTU on tunnel OR we have to do on source interface only? I don't find any option in juniper on tunnel interfaces.
On Tue, Aug 26, 2008 at 8:48 AM, Farhan Jaffer <[EMAIL PROTECTED]> wrote: > Yes exactly Masood. But if LDP won't work i am not able to do > anything. And it's not working. If the MTU size is mismatch OR less > than 1500, LDP session establish or not? There is no ACL / prefix list > in b/w. > > > On Mon, Aug 25, 2008 at 9:44 PM, Masood Ahmad Shah > <[EMAIL PROTECTED]> wrote: >> Yea you can have established LSP without LDP. Guess how :) >> >> What if you are running both LDP and RSVP... ;) >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Junaid >> Sent: Monday, August 25, 2008 8:35 PM >> To: Farhan Jaffer >> Cc: Juniper Puck >> Subject: Re: [j-nsp] LDP Session over GRE Tunnel >> >> Hi, >> >> Check the transport addresses used by LDP on both nodes. These >> addresses should be reachable via IGP or static routes over the GRE. >> It is surprising that LSP is established without LDP! >> >> >> Regards, >> Junaid >> >> >> On Mon, Aug 25, 2008 at 8:05 PM, Farhan Jaffer <[EMAIL PROTECTED]> wrote: >>> Hi, >>> >>> I am testing connectivity over GRE tunnel, IBGP session is >>> established, LSP is also established, however LDP session is not going >>> to establish. Any idea? >>> >>> FJ >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp