All:
This is aimed more at people who running Juniper routers in fairly high
traffic environments, but any input is certainly welcome.
I'm looking for recommendations/bast practices regarding what are good
starting points for setting the Netflow sampling rates to balance
accuracy of flow stats against not blowing the ASPIC-II out of the
water...
I've read a bit about this and the consensus seems to be that there is no
consensus :) I've seen implementations using between 1 packet out of
every 100 to 1 out of 1000 with differing run lengths.
We do use Netflow based monitoring, so there is a need to sample often
enough to keep the data reasonably accurate.
jms
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
