Hi Rahman, Many of the cisco IOS releases do not support ssh version 2, they support only version 1 or 1.5.
By default i think BSD only allows version 2 and stronger cyphers. >From my router (running 12.4.18b): cr1.lda6.ao>ssh ? -c Select encryption algorithm -l Log in using this user name -m Select HMAC algorithm -o Specify options -p Connect to this port -v Specify SSH Protocol Version WORD IP address or hostname of a remote system Regards, Rolf On Monday 01 September 2008 04:45:49 a. rahman isnaini rst / netsoft wrote: > Hi, > > > I'm trying to do ssh from my cisco router to juniper box. > Cisco IP has been permitted, to log in. > But not success, the error is : > > Sep 1 10:22:23 GW-1 sshd[38928]: Did not receive identification string > from 192.168.0.99 > Sep 1 10:22:23 GW-1 inetd[2541]: /usr/sbin/sshd[38928]: exit status > 0xff00 > > From Cisco : > gw-99#ssh ? > -c Select encryption algorithm > -l Log in using this user name > -o Specify options > -p Connect to this port > WORD IP address or hostname of a remote system > > Any suggestion ? > > > rgs > a. rahman isnaini r.sutan > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp