Have you enabled traceoptions anywhere for the purposes of debugging? If so, what did you see there. You'll likely need to share some of your config with us. I know route reflection isn't supported 'inside' a VRF, but that's not what you're trying to do, so I have to think what you're trying to do IS possible (though I've never done it).
David 2008/9/19 Abhi <[EMAIL PROTECTED]>: > Hi Every Body > > I am configuring Juniper router in a Lab Setup i am able to establish full > mesh connectivity will configuring router to support L3 VPN functionality > with other 3 router by explicitly configuring them. i tried configuring one > of the Router to be RR and simultaneously be a peer for L3 VPN peer. > > It failed to work in this manner. > > 1) Can we do this if yes how. I know this would not have a practical > application but we need to test the same. > > regards > abhijeet.c > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp