Hi list. Based on the explanations from http://www.juniper.net/techpubs/hardware/erx/junose81/hw-e320-hardware/r est-lcms-srps.html <http://www.juniper.net/techpubs/hardware/erx/junose81/hw-e320-hardware/ rest-lcms-srps.html> and from my job experience with ERX, I understand that when we issue a NMI reset on the active SRP, no line card should be affected (reboot). Depressing the NMI button should only soft reset the SRP and no subscribers should be affected. I've just tried this procedure on a lab E320, using release 8-1-2. After depressing NMI button, there was a SRP switch, and all LC rebooted. I'd like to discuss if this is normal, or I'm facing an unusual behavior... Thanks in advance
Thiago Drechsel _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp