> I am trying to build l2circuits between a few junipers in my network > without any luck. In my test case I have M20s with dual LH optic GIGe > interfaces facing a cisco cat 6500 using 802.3ad where I then have > vlans hanging off said switch to service downstream transit customers > and, I was hoping, possible transport customers.
As far as I know, the LH PICs don't support flexible-ethernet-services. You may want to try "encapsulation vlan-ccc" at the physical interface level. See also "Configuring VLAN Encapsulation" at for instance <http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-network-interfaces/id-12148010.html#id-12148010> Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp