> around for years and that nobody seems to care about either. For example > "show interface diagnostics optics" allows you to hit enter afterwards > without specifying an interface, but if you don't specify an interface > it won't return any optical data at all. This not only doesn't follow > all other behaviors, but there is no way to "scan" all of your > interfaces for their optical data short of typing them all our manually.
Current workaround to scan all interfaces is to specify a wildcard [EMAIL PROTECTED]> show interfaces diagnostics optics Physical interface: ge-0/0/0, Enabled, Physical link is Up Interface index: 136, SNMP ifIndex: 24 Link-level type: Ethernet, MTU: 2000, Speed: 10Gbps, Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled Device flags : Present Running Interface flags: SNMP-Traps Internal: 0x4000 ... [EMAIL PROTECTED]> show interfaces diagnostics optics * Physical interface: ge-0/0/0 Laser bias current : 42.880 mA Laser output power : 0.705 mW / -1.52 dBm Module temperature : 38 degrees C / 100 degrees F Laser rx power : 0.773 mW / -1.12 dBm Laser bias current high alarm : Off Laser bias current low alarm : Off Laser output power high alarm : Off Laser output power low alarm : Off Module temperature high alarm : Off Module temperature low alarm : Off Laser rx power high alarm : Off Laser rx power low alarm : Off Laser bias current high alarm threshold : 84.600 mA Laser bias current low alarm threshold : 17.800 mA Laser output power high alarm threshold : 2.238 mW / 3.50 dBm Laser output power low alarm threshold : 0.075 mW / -11.25 dBm Module temperature high alarm threshold : 75 degrees C / 167 degrees F Module temperature low alarm threshold : -5 degrees C / 23 degrees F Laser rx power high alarm threshold : 1.778 mW / 2.50 dBm Laser rx power low alarm threshold : 0.023 mW / -16.40 dBm What you are referring to is actually PR285978 and is resolved in upcoming releases. [EMAIL PROTECTED]> show interfaces diagnostics optics Physical interface: ge-1/0/0 Laser bias current : 30.312 mA Laser output power : 0.821 mW / -0.86 dBm Module temperature : 30 degrees C / 86 degrees F Laser rx power : 0.566 mW / -2.47 dBm Laser bias current high alarm : Off Laser bias current low alarm : Off Laser output power high alarm : Off Laser output power low alarm : Off Module temperature high alarm : Off Module temperature low alarm : Off Laser rx power high alarm : Off Laser rx power low alarm : Off Laser bias current high warning : Off Laser bias current low warning : Off Laser output power high warning : Off Laser output power low warning : Off Module temperature high warning : Off Module temperature low warning : Off Laser rx power high warning : Off Laser rx power low warning : Off Laser bias current high alarm threshold : 80.000 mA Laser bias current low alarm threshold : 10.000 mA Laser output power high alarm threshold : 1.258 mW / 1.00 dBm _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp