Hi ,
How does juniper tells "network A.B.C.D/M will be announced to all
neighbors" ?
In cisco below mentioned command can be use to configure above mentioned
scenario.
*network *A.B.C.D/MBGPThis command adds the announcement network.
router bgp 1
network 10.0.0.0/8
This configuration example says that network 10.0.0.0/8 will be announced to
all neighbors. Some vendors' routers don't advertise routes if they aren't
present in their IGP routing tables; bgp doesn't care about IGP routes when
announcing its routes.
*no network *A.B.C.D/M
*
Does juniper support command called network ?*
Thanks
Harish
------------------------------------------------------
To accomplish great things, we must not only act, but also dream; not only
plan, but also believe.
With regards
Harish.T
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
