On Fri, Oct 31, 2008 at 8:50 AM, Thiago Drechsel <[EMAIL PROTECTED]> wrote: > Hi list. > > A question that came up few days ago: > > 1. I've used "monitor traffic" on lo0, in order capture some traffic. I was > trying to capture pings, protocol packets and other traffic destined to lo0. > The problem is that I could not capture any packet!! Why this behaviour? I > understand that I must be able to capture traffic on lo0, like I do in any > other interface. Am I missing something? > PS: There was no filter applied during the tests. > > Thanks for any comment. > > Thiago
Did you do monitor traffic on lo0, or monitor traffic on lo0.0? The latter should work, the former should not. -- Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp