Hi Chad,
Below is a sample configuration.
For the vbr configuration do it inside the vci 0.10.
https://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-atm-interfaces_1.html
#id-10789115
--raymondh
at-0/3/0 {
mtu 9180;
encapsulation atm-pvc;
atm-options {
vpi 0 {
maximum-vcs 2000;
}
}
unit 0 {
encapsulation atm-snap;
multipoint;
family inet {
address 10.0.0.1/30 {
multipoint-destination 10.0.0.2 {
vci 0.10;
oam-period 10;
inverse-arp;
}
}
}
}
}
On Nov 13, 2008, at 12:57 AM, Chad Whitten wrote:
Hello,
I'm new - very new - to the Juniper world and have a quick question
that I
have not been able to resolve myself or find documentation online for.
I'm trying to replace a Cisco with a Juniper for PVC aggregation and
have
run into a stumbling block finding a workaround for the cisco
command - atm
route-bridged ip - that is placed on the atm interface. Could
anyone offer
a suggestion on how to get past this issue?
Below are the interface configs for both the Cisco and Juniper
currently
rt03#sh run int atm1/0.20208
Building configuration...
Current configuration : 283 bytes
!
interface ATM1/0.20208 point-to-point
mtu 9182
ip address 10.252.145.233 255.255.255.252
no ip proxy-arp
atm route-bridged ip
no atm enable-ilmi-trap
pvc 2/208
protocol ip 10.252.145.234 no broadcast
vbr-rt 130 64
!
end
dslrt01> show configuration interfaces at-0/1/0.2208
encapsulation atm-snap;
multipoint;
family inet {
mtu 4470;
address 10.252.145.233/30 {
multipoint-destination 10.252.145.234 vci 2.208;
}
}
Thanks
--
Chad Whitten
[EMAIL PROTECTED]
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
