Hello, i am trying to do mppp with a M7i with integrated ASM acting as a LNS. Multilink doesnt seem to work. The problem seems to be the negotiation of the MRRU between the M7i and the CPE. There is no way to configure the MRRU on the M7i for L2TP.
This dump is from a cisco 1841: Dec 2 00:49:23.041: Vi2 LCP: O CONFACK [REQsent] id 243 len 18 Dec 2 00:49:23.041: Vi2 LCP: MRU 1492 (0x010405D4) Dec 2 00:49:23.041: Vi2 LCP: AuthProto PAP (0x0304C023) Dec 2 00:49:23.041: Vi2 LCP: MagicNumber 0x2931D269 (0x05062931D269) Dec 2 00:49:23.041: Vi2 LCP: I CONFREJ [ACKsent] id 1 len 20 Dec 2 00:49:23.041: Vi2 LCP: MRRU 1524 (0x110405F4) Dec 2 00:49:23.041: Vi2 LCP: EndpointDisc 1 funworks (0x130C0166756E776F726B7320) Dec 2 00:49:23.041: Vi2 LCP: O CONFREQ [ACKsent] id 2 len 14 Dec 2 00:49:23.041: Vi2 LCP: MRU 1492 (0x010405D4) Dec 2 00:49:23.041: Vi2 LCP: MagicNumber 0x220F7774 (0x0506220F7774) On the juniper: Dec 2 01:49:23 jnp_ppp_thread_get_event: Ses 13125/62684 0x85f5d00: state ppp_pap_server_initial processing event AUTH OK (19) Dec 2 01:49:23 Ses 13125/62684 PPP: Server auth OK Dec 2 01:49:23 Ses 13125/62684 PPP: I magic 0x220f7774 O magic 0x2931d269 I mru 1500 O mru 1492 Dec 2 01:49:23 Ses 13125/62684 PPP: I mrru 0 O mrru 0 Dec 2 01:49:23 Ses 13125/62684 shdsl-xxx PPP: idle 0 keepalive 10 interface Dec 2 01:49:23 Ses 13125/62684 shdsl-xxx PPP: cos 0 0 0 overhead 0 cell 0 Dec 2 01:49:23 fill_service_interface using tunnel_if_id As you can see, the juniper sets the MRRU for both incoming and outgoing to 0. As there is no way to configure the MRRU i really wonder how MPPP should work for L2TP? Regards, Jonas Frey _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp