On Sunday 07 December 2008 05:41:19 Diogo Montagner wrote: > I think it is based on forwarding plane because when you > configure uRPF on a multi-homed environment you need > issue the command "set routing-options forwarding-table > unicast-reverse-path feasible-paths". You can find this > on JNCIS-M study guide. But there is no mention about > default route. I think you cannot use uRPF with only a > default route.
This topic was discussed in much detail, here: http://markmail.org/message/47d2bspl4x2enr4d Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
