Hi BIT, You can use join-load-balance as below,
http://www.juniper.net/techpubs/software/junos/junos90/swconfig-multicast/configuring-pim-join-load-balancing.html#id-join-load-bal-guidelines [edit protocols pim] rp { static { address 10.10.10.1; } } interface all { mode sparse; version 2; } join-load-balance; <<< You need to upgarde JUNOS to 9.0 or later. Regards, Hangu On Mon, Dec 8, 2008 at 8:21 PM, Bit Gossip <[EMAIL PROTECTED]> wrote: > Experts, > do you know if Junos (8.5 for mx960) will load balance across two equal > cost path once I install them in inet.2 with the following: > > routing-options { > rib inet.2 { > static { > route 104.104.104.104/29 next-hop 1.1.1.1; > route 104.104.104.104/29 next-hop 2.2.2.2; > } > } > } > > and pim is running on both interfaces? > > Or I have to do something more? > > Thanks, > BIT. > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp