> On 16 Dec 2008 at 12:24, Tom Storey wrote: > [...] >> Can anyone confirm if DDR400 will work with a J2300? I understand this >> is >> able to fall back to DDR266. > > Yep, that's just the spec. The clock is supplied by the chipset. > If I'd planned ahead I would have used the memory I pulled from my > SSG 550 in my J2300, but I'd already purchased more (identical sticks > from Crucial). It's DDR (i.e. DDR1), non-ECC. If you use a memory > selector, just choose an Intel 845G motherboard. I prefer Crucial as > Juniper uses Micron sticks, but that's just paranoia. > Theoretically the chipset will support >1GB, but I haven't tried > more in the J2300. While the forwarding process sucks up a > tremendous amount or RAM, I doubt >1GB (to achieve >512MB free when > idle/unconfigured) would buy you much. > > [...] > > Peter E. Fry
Thanks to all who responded. Seems Ive got everything sorted out now. :-) Cheers, Tom _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp