Hello Truman,
When I gave it further thought I might be monitoring the wrong
parameters.
All L2TP tunnels are established to the default VR, and subscribers
are mapped to the different VRs based on Radius profile.
I think we should be monitoring number of subscribers and not number
of L2TP sessions (I'm not sure what is the difference between the
two, except that a subscriber can be non L2TP).
Can anyone save me some reading and suggest the OID for monitoring
number of subscribers?
Regards
Amos
On Dec 22, 2008, at 7:46 PM, Truman Boyes wrote:
Hi Amos,
Most of the snmp oid's support virtualization (ie. virtual-routers).
More details are here:
http://www.juniper.net/techpubs/software/erx/junose93/swconfig-
system-basics/overview_2.html#jN17574
Basically you specify the virtual-router with the community string.
Ie. pub...@your-virtual-router
Kind regards,
Truman
On 22/12/2008, at 11:41 AM, Amos Rosenboim wrote:
Hello List,
We are using an ERX 310 as an LNS (Junos-E Version: 9.0.0
release-0.0 [BuildId 8976]).
We have few virtual routers which are used for some sub-providers
(virtual ISPs).
We are able to use SNMP and poll the total number of sessions, but
cannot find the oid for polling per virtual router number of
sessions.
Any help will be appreciated.
Regards
Amos
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
