Joe, You should be able to pass BPDU's through without any configuration tweaks. >From the 9.2 docs:
http://www.juniper.net/techpubs/software/junos/junos92/swconfig-vpns/transmitting-nonstandard-bpdus.html#id-10110163 HTH -Dan On Wed, Feb 11, 2009 at 5:39 PM, Joseph Soricelli <j...@proteus.net> wrote: > All- > > Got a simple L2VPN setup with some 7609 as CE and MX480 (9.2R3) as PE (no P > boxes). > > 7609----MX480-1----MX480-2----7609 > CE PE PE CE > > > L2VPN comes up with no issues. In troubleshooting some intermittent ping > and L3 issues from the 7609 side I notice that the switches do not see each > other via CDP, nor to they seem to be seeing each other via STP. > > It hasn't been THAT long since I was doing one of these last but I'll be > darned if I can recall this specific tidbit. So, am I crazy, or should those > packets be passed through the L2VPN just fine? > > As a side note, I think the problem might actually be on the 7609 side > since I see output packet stats on the PE but no inbound packet stats on the > CE. But, I gotta make sure my STP/CDP assumption is correct before I start > throwing stones! ;-) > > Thanks, > Joe > > Joseph Soricelli > JNCIE #14/ CCIE #4803 > 703-980-3999 > j...@proteus.net > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp