Hi many thanks for your email. Yea we are looking for OTN type equipment that insets colored laser directly into the DWDM system. Can you please give us some insights in detail on it.
Second how much dB losses from transponder to PC-1OC192-SON-XFP PIC are supported. It will work with -6 or -7 dBm or not. It would be nice if you can describe this. Once again thanks for your quick response. -----Original Message----- From: Patrik Olsson [mailto:pols...@juniper.net] Sent: Friday, February 13, 2009 6:38 PM To: Andrew Jimmy Subject: RE: [j-nsp] Juniper SONET OC48/192 Hello! >I'm just looking information about juniper 'PC-1OC192-SON-XFP, >XFP-10G-L-OC192-SR1'. For this we need to have SDH or we can directly >terminate into DWDM network. What will be the coloring scheme? How do you >consider dB losses when interconnecting router optical interface to SDH >which contains two to three ODFs on the path? What if I'm expecting -5 dBm >-6 dBm losses, the above card will work or not. I'm looking the same thing >for 'PC-4OC48-SON-SFP'.? If you use PC-1OC192-SON-XFP with XFP-10G-L-OC192-SR1, you need a transponder in the DWDM system, you can not insert the signal directly since this type of XFP sends "normal" light. Same goes for PC-4OC48-SON-SFP with the SFP-1OC48-SR. The loss discussion is then not upto the XFP/SFP, since you need to use a transponder in the system, and the DWDM system will be the source of the colored light. Are you indeed looking for OTN type of equipment that inserts colored laser directly into the DWDM system? Cheers Patrik _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp