Nilesh, I already add "family inet" as hash-key on both PE, but it still cant achieve load sharing in as1
Best Regards As'ad On Wed, Feb 18, 2009 at 12:26 PM, Nilesh Khambal <nkham...@juniper.net> wrote: > Is it the traffic coming in from "pacnet" vrf that you are trying to load > balance when going over as1 towards MPLS cloud? If so, I think you should > configure "family inet" hashing as well on the PE. > > Thanks, > Nilesh > > > > > > As ad Arafat wrote: >> >> Hi Nilesh, >> >> I attached "show route a.b.c.d extensive" and "show route >> forwarding-table destination a.b.c.d extensive" >> i use hash like this. >> >> hash-key { >> family mpls { >> label-1; >> payload { >> ip; >> } >> } >> } >> >> On Wed, Feb 18, 2009 at 12:03 PM, Nilesh Khambal <nkham...@juniper.net> >> wrote: >>> >>> Can you please send the output of below 2 commands for the destination >>> that >>> you want to load balance? >>> >>> "show route a.b.c.d extensive" >>> "show route forwarding-table destination a.b.c.d extensive" >>> >>> What kind of hashing have you configured under "edit forwarding-options"? >>> >>> >>> Thanks, >>> Nilesh. >>> >>> As ad Arafat wrote: >>>> >>>> Hi list, >>>> >>>> I got m7i and m10i linked aggregated sonet interface with 2 sonet >>>> interface inside it. >>>> I already add load-balancing per-packet policy and forwarding-option >>>> cinfiguration >>>> But one of sonet interface seem underutilized. >>>> >>>> Any workaround for this issue? >>>> >>>> Best Regads >>>> >>>> Asad >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp