On Monday 23 February 2009 10:22:17 pm chenoi A wrote: > run bgp between both router. This stm1 will be the trunk > and our upstream initially will provide perMeg basis in > this trunk...initally 1xE1 until the STM1 trunk full > capasity. Interconnection is STM1 but the > internet provided by upstream is E1. may i know how is > the setup here. please help me....please assist...as iam > vry puzzle here.
There's two possibilities here: a) You're running a channelized STM-1 PIC, which can get you n x E1 logical circuits. b) You're running a clear-channel STM-1 PIC, and your upstream will likely use policing to limit your bandwidth to/from them to 2Mbps increments, or as your contract permits. I'd recommend the latter, less configuration hassle given the application. Channelized STM-1 makes more sense for customer PE-side customer aggregation in n x E1 increments. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp