On Mon, 23 Feb 2009, chenoi A wrote: >> For information...iam using cSTM1... ..if my customer request for 4M >> internet via ethernet port..then i will request from my upstream for >> 4M internet...may i know how is the configuraton here....
Well, you can try to start with: http://www.juniper.net/techpubs/software/junos/junos94/swconfig-network-interfaces/example-configuring-channelized-stm1-interfaces.html Then eventually bundling multiple interfaces into multilink ppp, or using EBGP multihop or EBGP multipath, but all three options introduce enormous operational burden. And there are limitations. Plus, your provider needs to support it + have clueful personnel to help you in the middle of the night if that monster breaks. If I were you I would rather consider using a normal STM1 interface and a policer/rate-limit/CAR on the provider side. Mostly standard setup nowadays and upgrade is a matter of minutes. Regards, Beri _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
