Hi All, I have configured E3 Multilink bundle for 2 E3 interface between M7i routers. Configuration seems to me ok and P2P IPs over lsq interface are working fine. Traffic is load-balnace over the two E3. But the maximum throughput of bundle interface is not exceeding more the 30Mbps bandwidth.Can any one help have any clue that why maximum throughput of bundle interface is not increasing. Following is the configuration..
A---end # show chassis fpc 1 { pic 2 { adaptive-services { service-package layer-2; } } # show interfaces e3-0/3/2 keepalives down-count 1; encapsulation ppp; unit 0 { family mlppp { bundle lsq-1/2/0.0; } } [edit] # show interfaces e3-0/3/3 encapsulation ppp; unit 0 { family mlppp { bundle lsq-1/2/0.0; } } [edit] # show interfaces lsq-1/2/0 per-unit-scheduler; unit 0 { encapsulation multilink-ppp; point-to-point; disable-mlppp-inner-ppp-pfc; minimum-links 1; family inet { address 10.0.10.1/30; } } [edit] B -- end exactly have same configuration Regards. Aamir _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp