I couldn't understand if this issue is resolved... If not, try to configure ospf using 'set protocol ospf area 0.0.0.0 interface a.b.c.d' (basically using ip address configured on the interface instead of interface name)... I faced a similar issue and that configuration fixed the problem.
Hope this helps. Massimo On 28/03/2009, Harry Reynolds <ha...@juniper.net> wrote: > Sorry I missed that. I believe its needed. > > > > -----Original Message----- > From: Aamir Saleem [mailto:aamirw...@gmail.com] > Sent: Friday, March 27, 2009 9:11 PM > To: Harry Reynolds > Cc: Sean Clarke; Juniper Puck > Subject: Re: [j-nsp] OSPF NBMA > > Dear Harry, > > Thanks for your response. As already mentioned in my emal that NBMA mdoe > is working perfectly with multipoint interface configuration. without > multipoint will this not work? > > Regards. > Aamir > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp