i use external clocking. show configuration interfaces e1-2/0/0 mtu 4500; clocking external; encapsulation cisco-hdlc; unit 0 { family inet { address xx.xx.xx.xx/30; } family iso; family mpls; }
On Fri, Apr 17, 2009 at 1:35 PM, Sean Clarke <s...@clarke-3.demon.nl> wrote: > On 4/17/09 8:15 AM, Faizal Rachman wrote: > > But if we ignore the restarted router, why should i have to unplug/plug E1 > cable facing to peer router to make it work again. > I believe that keepalive is kind of setting to make interface know while it > is up or down. But after several times, link cannot revert back to normal > until unplug/plug ritual. > > > That should not happen IMO ... there must be something else up .. timing > ? > However are you clocking the circuit ? > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp