David, i am sorry but you need a FPC-E (for M20) or FEB-M5-E/FEB-M10-E (enhanced FEB for M5/M10).
Without this you will see no traffic at all (no arp etc) but the pic will be detected. As for the form factor it doesnt matter, the electronics are the same so you can use P/PE in any combination within M5/M10/M20. Regards, Jonas On Tue, 2009-04-21 at 16:37, David Jacobs wrote: > Hello all, > > > > So I have recently acquired a few P-1GE-SFP cards. I have a few old M5, M10 > and M20 chassis sitting around. > > So I decided to do some testing on these cards (just to ensure they > work)..Needless to say I have had some headaches. > > > > I have read some conflicting reports and was hoping someone with more > knowledge than me could help me out. > > > > I have read reports that say the P-1ge-sfp will work in a regular M5/M10 > chassis...it just doesn’t have the fancy eject handle. > > Others say it won’t work; you need the PE-1ge-sfp. > > > > I also tried these cards in an M20 with just a regular FPC..some have said > it requires an FPC-E? > > > > > > The card gets recognized and I am able to get link however I am not able to > get arp or icmp working. I have tried Juniper to Juniper - Juniper to Cisco > - Juniper to Dumb Linksys switch. I have tried various brands of SFP optic > as well, also trying different cabling...TX, SX to LX. > > > > I am just hoping someone else could shed some light on the this > > > > Many Thanks > > > > Dave J > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
