-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 As stated in the reply from Pekka Savola to the threat "FPC-Offline on M20 after Upgrade JunOS 8.5 to 9.3"
> > The very, very old FPC's (prior to E-FPC's) no longer work in 9.3, > as stated in release notes. This may or may not be related. > HTH. /T Eric Van Tol wrote: > Hi all, > Is anyone out there running 9.3 with an M20 FPC (not FPC-E). I have a lab > box that I've upgraded to 9.3R2.8 and the FPC won't come up. The only PIC in > this FPC is a P-4CHDS3 PIC. The FPC basically goes from "Present" state to > "Offline" within a few minutes of booting: > > May 5 15:07:06 m20 ssb CM(0): Slot 0: No response from FPC interface manager > May 5 15:07:06 m20 chassisd[4671]: CHASSISD_FRU_EVENT: > scb_recv_slot_detach: detached FPC 0 > May 5 15:07:06 m20 ssb CM(0): Slot 0: No response from FPC chassis manager > May 5 15:07:06 m20 chassisd[4671]: CHASSISD_IFDEV_DETACH_FPC: > ifdev_detach(0) > May 5 15:07:06 m20 ssb CM(0): Slot 0: Unrecoverable error; probe failed > > I would normally open a ticket, but this is a lab box not under contract that > I'm using to test some stuff out on. Everything works fine with 9.0R2.10. > Juniper support site says FPC and this PIC are a valid combination for 9.3, > so I'm at a loss here. > > -evt > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkoBnkQACgkQe5lbQTruUNWu9gCeMEPpc2ZnR1HGZTMH9lBCtbYP hiEAn3n4OK25vORPZAQddGdPgkWHfdIn =H5+A -----END PGP SIGNATURE----- _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp