That is exactly the point :-) I have created an area 0 adjacency and the default is sent to the totally-stubby-area
Thank you very much for help. -----Original Message----- From: Harry Reynolds <ha...@juniper.net> To: The Dark One <thedark...@list.ru>, Juniper Puck<juniper-nsp@puck.nether.net> Date: Thu, 14 May 2009 13:47:43 -0700 Subject: RE: [j-nsp] OSPF default in TSA > Does rc2 have an area 0 adjacency up? If not I believe active backbone > detection suppresses the default. Looks likes its area 0 lsdb is all > self-populated. > > Regards > > http://www.juniper.net/techpubs/software/junos/junos94/swconfig-routing/configuring-the-backbone-area-and-other-areas.html > > > > > > > > -----Original Message----- > From: juniper-nsp-boun...@puck.nether.net > [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of The Dark One > Sent: Thursday, May 14, 2009 1:24 PM > To: Juniper Puck > Subject: [j-nsp] OSPF default in TSA > > Experts, > according to JNCIP_studyguide pag 179: > "Juniper Networks routers do not automatically generate a default route when > operating as an ABR attached to a stub or not-so-stubby area. With JUNOS > software, you must configure a default metric before a default route will be > advertised!" > > But router 'itp' doesn't get it :-( any idea why and how? > Thanks! > > rc2> show configuration routing-instances RI protocols ospf > area 13.246.165.176 { > stub default-metric 1 no-summaries; > interface ge-5/2/1.176; > } > area 0.0.0.0 { > interface ge-5/2/0.314; > } > > rc2> show ospf database instance RI > > OSPF database, Area 0.0.0.0 > Type ID Adv Rtr Seq Age Opt Cksum Len > Router *13.246.165.177 13.246.165.177 0x80000004 119 0x22 0x1813 36 > Summary *13.246.165.151 13.246.165.177 0x80000004 119 0x22 0x712a 28 > Summary *13.246.165.176 13.246.165.177 0x80000004 119 0x22 0x4248 28 > > OSPF database, Area 13.246.165.176 > Type ID Adv Rtr Seq Age Opt Cksum Len > Router 13.246.165.151 13.246.165.151 0x80000006 266 0x20 0x8f14 48 > Router *13.246.165.177 13.246.165.177 0x80000008 119 0x20 0xeed0 36 > Network *13.246.165.177 13.246.165.177 0x80000003 119 0x20 0x12db 32 > > l...@hu-bud01a-rc2> show ospf neighbor instance RI > Address Interface State ID Pri Dead > 13.246.165.178 ge-5/2/1.176 Full 13.246.165.151 1 36 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > itp#show ip interface brief | ex una > Interface IP-Address OK? Method Status > Protocol > FastEthernet0/0 13.246.165.178 YES manual up > up > Loopback0 13.246.165.151 YES manual up > up > > itp#show running-config | s router ospf > router ospf 1 > router-id 13.246.165.151 > log-adjacency-changes > area 13.246.165.176 stub > network 0.0.0.0 255.255.255.255 area 13.246.165.176 itp#show ip route <....> > Gateway of last resort is not set > > 13.0.0.0/8 is variably subnetted, 2 subnets, 2 masks > C 13.246.165.151/32 is directly connected, Loopback0 > C 13.246.165.176/29 is directly connected, FastEthernet0/0 > > > itp#show ip ospf database > > OSPF Router with ID (13.246.165.151) (Process ID 1) > > Router Link States (Area 13.246.165.176) > > Link ID ADV Router Age Seq# Checksum Link count > 13.246.165.151 13.246.165.151 424 0x80000006 0x008F14 2 > 13.246.165.177 13.246.165.177 278 0x80000008 0x00EED0 1 > > Net Link States (Area 13.246.165.176) > > Link ID ADV Router Age Seq# Checksum > 13.246.165.177 13.246.165.177 278 0x80000003 0x0012DB > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp