JUNOS 9.6 will increase the limitation to 256 and even more in future release.
On Thu, Jun 11, 2009 at 10:55 AM, Ben Dale <bd...@comlinx.com.au> wrote: > I have run into this issue in the past - one hack I have used to work > around it is to configure for example 8 rules of destination NAT and then 8 > rules of static NAT. The static NAT takes away your ability to specify > port, but you could use policies to limit the traffic allowed through (but > not perform PAT though). > > Cheers, > > Ben > > > > > On 10/06/2009, at 11:10 PM, Alexander Shikoff wrote: > > Hello! > > I have J2320 with JunOS 9.5, one external interface with one IP-address. > I wish to make destination NAT for 12 different hosts in my internal > network, > for example > <external IP> port 5000 -> <local IP1> port 5000 > <external IP> port 5001 -> <local IP2> port 5001 > [...] > > But one rule-set can contain only 8 rules. If I split all 12 rules in some > rule-sets, then I get an error > "error: Destination NAT rule-set NAT-Prime and NAT-DOM have same context." > > Is there a way to solve this? Thanks. > > -- > MINO-RIPE > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- BR! James Chen _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp