That was way too easy. Not sure why that didn't occur to me. Thanks for
the quick help.
----- Original Message -----
From: "David Ball" <davidtb...@gmail.com>
To: "Steve Coleman" <scolem...@csolutions.net>
Cc: <juniper-nsp@puck.nether.net>
Sent: Friday, July 10, 2009 12:19 PM
Subject: Re: [j-nsp] BGP Route Announcement
Nothing fancy about it, really. Just make sure your export
policies facing your upstream(s) allow that /24, that your upstream(s)
are allowing the /24, and as long as its in your routing table, you
should be successfully exporting it to them.
David
2009/7/10 Steve Coleman <scolem...@csolutions.net>:
We an aggregate command on our M10i's to announce one of our ARIN CIDR
blocks. In this case it's a /19.
There is a /24 within this /19 that I would like to announce as a separate
route.
That is, I'd like to announce both the /24 and the /19 that the /24
resides within. This way I can force traffic for the /24 down a certain
link since it's a more specific route.
I am unsure how to accomplish this? Any pointers would be greatly
appreciated.
Thanks,
Steve
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp