[apologies if you receive this on-list twice.] Hi all,
Can anyone tell me what the equivalent functionality to DMVPN is in the world of Juniper? I understand there's "ACVPN" available in ScreenOS, but does anyone actually use this? Our local Juniper team didn't give us a warm, fuzzy feeling about this feature. As a side note, is it true that the any-to-any dynamic IPSec functionality that became DMVPN in Cisco world was actually developed by NetScreen prior to being acquired by Juniper? Is it true the functionality hasn't been developed to the same degree it has in IOS? We are looking at a (~60 site) deployment with Juniper CEs, using a service provider's L3VPN product, but CE device selection is proving a challenge -- we'd prefer not to roll out what seems to be a legacy platform in the SSGs, but the functionality apparently isn't there yet in JUNOS. Deploying hub-and-spoke in 2009 seems a bit backwards. If anyone has any anecdotes about ACVPN, or tips on how to achieve a similar configuration using a JUNOS-based device, please chime in! :-) The network will be supporting VoIP traffic, hence the any-to-any connectivity requirement. cheers, Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp