Hi,
Thanks for this info - that is what I need :-)
Tomek
david....@orange-ftgroup.com pisze:
Use the command "set system default-address-selection". And outgoing FTP
session will use your primary lo0.0 address
Regards,
David
-----Message d'origine-----
De : juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] De la part de Tomasz Szewczyk
Envoyé : mercredi 22 juillet 2009 16:19
À : Juniper Puck
Objet : [j-nsp] Source address for FTP?
Hi all,
Is there any option in JunOS which allows to set source address (lo0.0) for
outgoing (initiated by router) FTP connections?
Thanks
Tomek
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees.
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration.
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it
immediately and inform the sender.
********************************
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp