On Fri, Jul 24, 2009 at 07:17:52AM -0400, Truman Boyes wrote: > Wow that is old; I remember when 2.X came out for JUNOSe (UNISON as > the time).
Unisphere, actually. Although, the box still identified itself as a Redstone at the time :) > straight through ribbon cable or even a regular ethernet cable on the > diag port if you remove a faceplate next to the line card) ... The procedure of running with a faceplate removed has been described as turning the ERX into a very expensive vacuum cleaner by my favourite Unisphere SE :) > If this is not the issue, you still will find more information that > will lead you down the right path if you console the card. Also, it > will certainly be good if you can upgrade the memory to at least 128MB. You'll also have to reset to factory defaults if starting with a version prior to 4.0.0. See the release notes: http://www.juniper.net/techpubs/software/erx/erx51x/sw-rn-erx513/frameset.htm Have a nice weekend! -- Terje Krogdahl All roads lead to Rome - A clearly confused router (R. Perlman) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp