I have a number of EX series switches carrying vlans back to a central MX 480.
I have remote customers running bgp with their sessions terminating on the MX. Currently the whole system operates in layer two. I would like to move to a partial mesh deployment and use MPLS-CCC to carry the EX customer traffic back to the MX. The problem is, at the MX interface the traffic will be inside the tunnel. I could take a jumper and loop two of the MX ports using 1 to bridge and one to terminate the IP. That seems like a hack. Is there another method that could be used to terminate to a loopback interface or bridge domain so I dont need to burn the ports with loop plugs? Customer à EX 4200 à MPLS-CCC à MX 480 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp