But since this was in the M-Series... and I would assume when they mentioned "permit four archived copies that will be no larger than 128K" The solution should have been "archive size 128k files 4" and not just left as default. Maybe there was some error in printing. Is there any loss of points in overdoing anything... In this case I believe I am just setting the values without caring for the defaults.
-Hoogen On Mon, Sep 7, 2009 at 10:06 AM, Nalkhande Tarique Abbas < ntari...@juniper.net> wrote: > > The default maximum file size depends on the platform type: > > * 128 kilobytes (KB) for J-series Routers > * 1 (MB) for M-series, MX-series, and T-series routing platforms > * 10 MB for TX Matrix platforms > > So based on the setup/platform this value should be defined or probably > left to default. > > > Thanks & Regards, > Tarique A. Nalkhande > > > ----Original Message----- > From: juniper-nsp-boun...@puck.nether.net > [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Hoogen > Sent: Monday, September 07, 2009 10:23 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] JNCIP Case Study - 1 Pg 42 - archive size and files > > Modify the syslog parameters to log all interactive CLI commands to a > file > called rn-cli, where n is equal to the router number. Configure the CLI > log > to permit four archived copies that will be no larger than 128K, and > ensure > that CLI-related logging is also sent to 10.0.200.2, which is providing > a > remote syslog service. All other syslog parameters should be left at > their > default setting. > > Book Solution > > syslog { > user * { > any emergency; > } > host 10.0.200.2 { > interactive-commands any; > } > file messages { > any notice; > authorization info; > } > file r2-cli { > interactive-commands any; > archive files 4; > } > } > > My concern is the file r2-cli.. wherein archive files 4 is given.. but > the > question says "permit four archived copies that will be no larger than > 128K" > > My Solution was > > syslog { > user * { > any emergency; > } > host 10.0.200.2 { > interactive-commands any; > } > file messages { > any notice; > authorization info; > } > file r1-cli { > interactive-commands any; > archive size 128k files 4; > } > > Any insight into this... Am I missing something.. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
