Hi,
You should be able to do this with scripting.. Check out http://junos.juniper.net/scripts/op_scripts/default.asp?docId=13055 which combines RPM and disabling an interface in case the RPM initiated ping fails. It should be relatively easy to modify that for your purposes. The site does require registration, though. More info about scripting in general is available in the Configuration and Diagnostic Automation Guide. Kaj :) > From: matthew wyath <mwy...@gmail.com> > Date: Wed, 16 Sep 2009 07:42:59 -0700 > To: <juniper-nsp@puck.nether.net> > Subject: [j-nsp] reliable static routing/ip tracking > > Hi All, > > I wonder if it is possible to do static routing based on the availability of > an IP. Let's say that I am connected by Ethernet (through a modem) link to > my upstream provider. > I am not using any dynamic routing protocol with my ISP (so I can't use any > generated route) ...I can't use BFD either. I want to put a default static > route through my upstream provider but I want that route to be valid only > and only if a specific IP address is reachable in the Internet (by echo > request). Is it possible on Juniper J series routers?
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp