Quoc Hoang wrote: > What cabinets do you have the switch installed in? The 19' or 24' > cabinets? Since it's side to side cooling, I'm afraid the cold hot > aisle layout in a typical datacenter may pose an issue. 600x1200mm racks, hot/cold aisle, yes, it's problematic. Totally braindead decision by Juniper, as I reckon data center is one of the target areas for the switches. But the marketing-slide port density goes down if you do proper cooling...
Kind regards, Felix PS: we ended up axing the racks left & right of the EX and had our workshop build some custom sheet metal airflow guides, which effectively cuts the port density by two thirds. -- Felix Schüren Head of Network ----------------------------------------------------------------------- Host Europe GmbH - http://www.hosteurope.de Welserstraße 14 - 51149 Köln - Germany Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*) HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678 Geschäftsführer: Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller (*) 0,14 EUR/Min. aus dem dt. Festnetz, Mobilfunkpreise ggf. abweichend _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp