The J-series can create L2VPNs or Layer 2 circuit over the PDH
circuit. You need to run IP over the circuit. The J-series does not do
circuit emulation; but it will carry Ethernet through MPLS. Keep in
mind you will want to ensure that you shape on the e1 circuit and
possibly rate-limit on ingress because otherwise you will see traffic
loss during peaks and bursts.
Kind regards,
Truman Boyes
On 29/10/2009, at 11:20 AM, amin amin wrote:
Actually the existing equipment using RAD modem that do to convert
from e1
based to ethernet based. can the J series do like that?
On Wed, Oct 28, 2009 at 9:37 PM, 陈江 <iloveb...@gmail.com> wrote:
hi!
VPLS, L2VPN or L2circuit could done this.
On Wed, Oct 28, 2009 at 10:20 PM, amin amin <amien...@gmail.com>
wrote:
how can configure ethernet over E1 on Jseries without using IP
between
Jseries1 and Jseries2? it means interface E1 on Jseries to be
bridging
mode
LAN-----Jseries1-----------PDH---------------Jseries2--------LAN
Regards,
~Samin
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
BR!
James Chen
--
-------------------------------------------
http://aministi.web.id/
-------------------------------------------
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
