Hi gurus, I am looking for following cisco PBR example equivalent config for junos and work.
interface GigabitEthernet0/0 description WAN1-primary ip address 192.168.1.1 255.255.255.0 interface GigabitEthernet0/1 description WAN2-secondary ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet0/2 description To LAN ip address 192.168.0.1 255.255.255.192 ip policy route-map via-wan2 ip access-list extended pbr-test permit ip 192.168.10.0 0.0.0.255 any route-map via-wan2 permit 10 match ip address pppoe set ip next-hop 192.168.2.1 ip route 0.0.0.0 0.0.0.0 192.168.1.2 All traffic with source Ip address 192.168.10.0/24 will go via 192.168.2.1 secondary link remaining traffic will go via default route 192.168.1.2 primary link . I tried the following in junos but it is not working and all traffic just stuck, any tips would be appreciated.. [edit interfaces ge-0/0/0] unit 0 { description "WAN1-primary"; family inet { address 192.168.1.1/24; } } [edit interfaces ge-0/0/1] unit 0 { description "WAN2-secondary"; family inet { address 192.168.2.1/24; } } [edit interfaces ge-0/0/2] unit 0 { description "LAN"; family inet { filter { input via-WAN2; } address 192.168.0.1/24; } } [edit routing-options static] route 0.0.0.0/0 next-hop 192.168.1.2; [edit firewall filter via-WAN2] term 1 { from { source-address { 192.168.10.0/24; } } then { routing-instance pbr-test; } } [edit routing-instances] pbr-test { instance-type forwarding; routing-options { static { route 0.0.0.0/0 { next-hop 192.168.2.1; resolve; } } } } Regards, Samit _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp