On Wednesday 18 November 2009 06:48:17 pm Kris Amy wrote: > The plot thickens, > > With sampling set to 1/100. The box is nominally at 50%. > > However whenever we commit a config the box jumps to 100% > cpu for approx 10 minutes. We started seeing this when I > brought up 1 full bgp peer. My Partner has an open case > with JTAC for this and will let you know the results when > they come to hand.
Which box is this? We've seen similar behaviour on an M7i/M10i running any version of JUNOS post 9.x. Feedback from JTAC was that if an MS-PIC is not installed, recommend sampling rate be 1/1000. CFEB CPU seems to idle at about 8% following that. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp