Is there a way to see stats on bfd sessions, such as the number of
probes lost? I'm trying to figure out why I can't reliably keep bfd
running between two Juniper's without getting a ton of false positives,
even with very high detection thresholds. Nothing useful in "show bfd
session extensive" (below), and I'm not seeing anything obvious in the
pfe shell for bfd stats (I'm running ppm delegate, wondering if there
are possible issues there).
Detect Transmit
Address State Interface Time Interval Multiplier
x.x.x.x Up xe-7/0/0.0 5.000 0.500 10
Client ISIS L2, TX interval 0.500, RX interval 0.500
Session up time 00:12:13, previous down time 00:00:17
Local diagnostic NbrSignal, remote diagnostic CtlExpire
Remote state Up, version 1
Replicated
Min async interval 0.500, min slow interval 1.000
Adaptive async TX interval 0.500, RX interval 0.500
Local min TX interval 0.500, minimum RX interval 0.500, multiplier 10
Remote min TX interval 0.500, min RX interval 0.500, multiplier 10
Local discriminator 174, remote discriminator 84
Echo mode disabled/inactive
Remote is control-plane independent
--
Richard A Steenbergen <r...@e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
