This was a RE-333....long time ago. Maybe the datasheet was changed over time...not sure.
Havent tested this with a RE-400. This ram shouldnt be more than a couple of bucks...so if you pick the wrong one it shouldnt hurt too much. Regards, Jonas On Thu, 2009-12-03 at 16:11, Andy Harding wrote: > Jonas Frey wrote: > > We used: > > > > Kingston KVR133X72C2/256 > > > > Also have a look at: > > http://juniper.cluepon.net/index.php/Route_Engine_DRAM_Compatibility#RE-2.0_Generic_DRAM > > > > Interesting... > > The spec sheet as found here:- > > http://www.valueram.com/datasheets/KVR133X72C2_256.pdf > > > > Lists the internal config as 32Mx8bit which is incompatible with the > > Intel BX440 chipset used in the RE. It's quite likely that only 50% of > > the RAM would show up or not work at all. > > I take your's worked fine? Was this a RE-400 (m7i)? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp