Hi, We have tried similar scenario as follows and it worked pretty well for us:
4x Channelized E3 --> 4x RAD Optimux-34 (output is 4x16E1) --> SDH DDF (63+1 E1) --> SDH Channelized STM1 --> Juniper PB-1CHSTM1-SMIR RAD devices works pretty well and stable for demultiplexing and multiplexing. And we have not had a problem with multiplexed E1s in Juniper's channelized STM1 PIC. We were using M40e but it is also possible to terminate in M10is with PA-PICs... On Mon, Dec 28, 2009 at 2:45 PM, xseroot <ser...@doruk.net.tr> wrote: > Is there any one who has experience about optimux multiplexer/demultiplexer > devices, i want to setup a topology below, > Is there any one who works about a topology like this one? please share > your practise with me, > thanks > > > > > E3------->| | > | | > E3------->|====== RAD Optimux-1553 =====|====> Router-Channelized STM1 Card > | | > E3------->| | > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp