I'm wondering if anyone here has had any experience configuring the loop-free alternate paths for IS-IS in JUNOS, as described in the following drafts:
- Internet draft draft-ietf-rtgwg-ipfrr-spec-base-12.txt, Basic Specification for IP Fast-Reroute: Loop-free Alternates - Internet draft draft-ietf-rtgwg-ipfrr-framework-06.txt, IP Fast Reroute Framework And covered in http://www.juniper.net/techpubs/software/junos/junos95/swconfig-routing/jd0e 44501.html#jd0e44501. I'm looking for general guidance towards implementation, and any caveats which might be experienced in a typical deployment. It seems to me that using this, we can entirely get rid of Fast Reroute, or Link/Node protection within RSVP/MPLS, but perhaps my understanding is a bit off. I'm also curious what experiences others have had with regards to troubleshooting backup paths that might be established as a result of a given failure. Thanks in advance! Stefan Fouant, CISSP, JNCIE-M/T www.shortestpathfirst.net GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp